Kimtech


QSS 3501i	QSS 3501	QSS 3502

The new QSS-3501i/3501/3502 PLUS is a user-friendly, efficient, cost-effective minilab system that combines the same basic features as the QSS-35 series with even more features that meet a wide variety of customer needs, such as the ability to form a network connecting multiple printers, and a versatile layout in which the operation section (PC, monitor, scanner etc.) can be separated from the printer.
Main Features of QSS 35 Plus Series (QSS-3501i/3501/3502 PLUS)
1.	High quality print engines
	Noritsu Koki’s laser engine is used for the QSS-3501/3502 PLUS and an iBeam engine is used for the QSS-3501i PLUS. Both produce vivid, high quality prints of 300dpi.
2.	Flexible layout
	You can choose which side to operate the machine from, and the components can be separated and placed in various layouts, giving you more freedom to use the system in a way that best fits your available floor space. Furthermore you can also adjust the height by raising the table up to 20cm.
3.	“AccuSmart™” image processing technology employed
	Noritsu Koki’s AccuSmart™ technology enables you to easily portray the natural beauty of the scene as viewed by the photographer when the picture is taken. This advanced technology not only provides superb quality for well photographed images, it also applies appropriate correction to less-than-perfect shots, resulting in extremely high quality prints regardless of the image source.
4.	A selection of new film scanners to choose from (film scanners sold separately)
	With the QSS-35 PLUS series, you have three new film scanners to choose from. The HS-1800 supports a wide variety of film including 120, and the LS-600/LS-1100 support only 135 and IX240 film. You can also choose not to add a scanner, and instead use the QSS-3501i/3501/3502 PLUS as a stand-alone printer. Scanning capacity　LS-600 600 frames/hr, LS-1100 1100 frames/hr, HS-1800 1800 frames/hr
5.	New operation software “EZ Controller” (sold separately)
	The EZ Controller gives you the ability to easily perform many important functions such as PJP, value-added print creation, order management, and image correction. Furthermore, pictures are used to explain many of the instructions for start up checks and shut down checks, and warning messages are easy to locate and read.
6.	Setup prints taken care of automatically
	The colorimeter is built into the processor. This enables the setup print to be automatically inserted into the colorimeter after it comes out of the dryer unit, eliminating the need for manual operations. Also, the QSS-35 PLUS series has a new option called the “Control Strip Auto Loading Unit” that automatically processes control strips.
7.	Interrupted orders signified by LED lamp
	LED lamps on the order sorter (Standard for QSS-3502 PLUS. Option for QSS-3501i/3501 PLUS.) are used to indicate which orders have been interrupted and which print trays the interrupted orders are in.
8.	Rapid processing
	When purchasing a QSS-35 PLUS minilab you can specify a rapid processing system which uses specified chemicals to achieve a reduced processing time, opening the door for an on-the-spot print service where the customers can drop off their media and pick up their prints a single visit. Note: Only specified chemicals and paper can be used.
9.	Prints up to 914.4mm (36 inches) long
	The standard maximum paper advance length is 610mm, and this can be extended to 914.4mm if you add an option, making it possible to provide a wide variety of print services. QSS-3501/3502PLUS only
10.	Dual/Triple Magazines (Factory option)
	The dual and triple magazine systems enable labs that make various size prints to set multiple paper sizes at the same time. Magazine changes are quick and easy.
11.	An array of options
	The QSS-35 PLUS series supports the MD-2 Unit, Bravo II/Rimage CD writers, DVD writing and many other options to provide a scalable system that allows you to add new services as needed.
12.	Can be converted into a one pass system (Optional attachment units required)
	The film processor (QSF-T15) and the scanner (LS-600/LS-1100) can be combined into a single unit enabling the film to be automatically fed into the scanner as it comes out of the processor. This all-in-one configuration automates the entire process from 135 film development to printing, enabling unattended operation. Note: One pass processing is only possible with 135 film.

Specifications

Film Formats	LS-600/1100 135, IX240　　HS-1800 135, IX240, 110, 120, 220
Film Types	Negative, Positive, Black and White
Print Size	Paper width	82.5 to 210mm (up to 203mm for QSS-3501i PLUS)
Print Size	Paper advance length	82.5 to 610mm (An option can be added to the QSS-3501/3502 PLUS to increase the maximum paper advance length to 914.4mm)
Compatible input media	Standard	FD, CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM
Compatible input media	Option	CompactFlash, SmartMedia, SD Card, Memory Stick, xD-Picture, etc
Compatible output media	Standard	FD
Compatible output media	Option	CD-R, CD-RW, CompactFlash, SmartMedia, SD Card, Memory Stick, Microdrive, xD-Picture, DVD-R, DVD-RW, DVD-RAM, etc
(Approximate) Processing capacity (prints/hr)	135 negative / positive (24exp） No panoramas intermixed. With index prints.	Print size	Scanner	3501i PLUS	3501 PLUS	3502 PLUS
		W89 X 127mm	LS-600	600	600	600
			LS-1100	630	670	1,110
			HS-1800	630	670	1,200
		W102 X 152mm	LS-600	530	580	600
			LS-1100	530	580	1,040
			HS-1800	530	580	1,040
	Digital camera (6 megapixels) With digital camera correction.	W127 X 89mm (QSS-3502PLUS W89 X 127mm)		790	910	1,200
		W152 X 102mm (QSS-3502PLUS 102 X 152mm)		760	810	1,040

Capacity calculated according to our criteria. The actual capacity you achieve may be different.

QSS 3501i

QSS 3501

QSS 3502

Main Features of QSS 35 Plus Series (QSS-3501i/3501/3502 PLUS)